3×12 Welding Table

Our heavy duty steel pegboard is made from 18 gauge mild steel.  We form each piece for extra strength and then powder coat for durability.  Pegboard can be ordered to fit any of our standard size models, or can be ordered separately and fastened to the wall with screws.  If ordered at the time of purchase, we will weld your pegboard brackets to the pegboard before powder coating and we also weld attachment brackets on the back of the backsplash so you can remove the pegboard if necessary.  Adding pegboard as an option will increase the overall depth of the workbench slightly.

The formed channel receiver (receiver tube) is designed to allow the attachment of a vise or other accessory to the bench without permanently mounting it to the top.  By using a receiver tube(s) you can easily remove the accessory when it's not needed and allows you to use the entire work surface of the bench.  Each channel is formed out of 1/4" thick steel and has three tapped holes with set screws on both the outside and bottom of the channel to eliminate any slop or play.  The addition of receiver tube(s) most commonly accompanies the purchase of a Wilton ATV receiver hitch vise, or a receiver plate.  The receiver plate is used to mount a traditional bench vise or other accessory such as a grinder, belt sander, small drill press, etc.